Growing in model numbers, the 2013 range of motorcycles includes the 2-stroke Christini AWD 250 and AWD 300, as well as the AWD 450, 450 Dual Sport, 450 Supermoto, plus their newest addition – the Christini AWD 450 Enduro.
If you’re looking to jump into the world of AWD and want high performance without crossing into 2-stroke territory, then the 450 Enduro is your bike.
The AWD 450E includes an aluminium aftermarket exhaust for added horsepower, and a Keihin FCR 40mm carburettor for increased throttle response and greater tunability. The 450E is carried by 48mm forks and a fully adjustable single shock linkage type suspension.
A wide ratio transmission and electric starter make life easy.
Marzocchi 48mm sealed cartridge forks
Marzocchi 48mm shiver forks are valved and sprung with the AWD rider in mind. The featured Progressive Floating Piston (PFP) System allows riders to adjust spring preload/sag, high/low speed compression, as well as rebound based on conditions and style of riding. Flange M8x25 used in front fork assembly.
Redesigned top and bottom triple clamps
The top and bottom triple clamps have been recontoured to remove any excess material, making the end product lighter and sleeker, knocking off 220 grams.
Redesigned Dropout Gearboxes
The dropout gearboxes have been redesigned with an additional inner bearing for increased side load capacity and to promote better cooling for the brake system. The gearboxes have also been recontoured to remove excess material, resulting in a lighter, sleeker design. 
Redesigned Rear Sprocket
The new sprocket is a red anodized aluminium sprocket with an outer ring of steel teeth. This design lasts longer than an aluminium sprocket, and is lighter than a steel sprocket.
Front Hub Redesign
The proprietary front AWD hub that houses the front driving mechanism has been redesigned to take out almost 140 grams of weight, while adding an improved internal bearing for support.
Front and Rear Wave Brake Rotors
Wave brake rotors are known to improve brake-lever feel. They are made from high-carbon 420 laser-cut stainless steel.
Billet Aluminium Gas Cap
A custom designed, aluminium CNC machined gas cap gives added strength and style. The cap features a laser etched Christini AWD spiral logo with a red anodize finish, and includes a one-way vent line allowing the tank to breathe while preventing fuel from splashing.
Fox Podium RC2 Shock on the AWD 250 and AWD 300 2-stroke models
The Fox Podium RC2 Shock is custom designed for the 2013 Christini AWD 250 and 300 models. It comes with an improved Dual Speed Compression (DSC), improved spring preload adjuster, externally adjustable rebound, and a piggyback aluminium reservoir. The RC2 provides perfect course set-up every time.
Aluminium Exhaust with carbon fibre heat shield
The aluminium exhaust with a carbon fibre heat shield offers weight saving and added protection.
Custom Designed Radiators and Hoses
The Christini AWD custom radiators and hoses offer a better cooling flow and the ability to upgrade to an aftermarket fan that will keep your 2-stroke machine climbing impossible hills. 
The 2013 Christini AWD 450 E (Enduro)
• Priced at $7,795
• 450cc liquid-cooled single cylinder four stroke
• 5 Speed Wide Ratio Transmission • Electric and Kick Start
• Marzocchi 48mm Sealed Cartridge forks
• Adjustable Single Shock with Linkage
• Keihin FCR 40mm Carburetor
• Aftermarket aluminum exhaust
• Front Tire: 80/100-21, Kings Tire
• Rear Tire: 110/100-18, Kings Tire
• Brakes: Single Disc 240mm
• Weight: 120kg
• AWD Engagement Switch
• AWD Drive Ratio: 9:16 tooth (0.64:1)
• Final Drive Ratio: 13:50 tooth
